Odor Control Products and Equipment, LLC Shop On-Line. Free Shipping! Also visit www.shopodorcontrol.com

OCP&E Oxi-Fog™ Drum Mount System

$2,378.00 $2,335.00

OCP&E® Oxi-Fog™ Drum Mount System

The OCP&E® Oxi-Fog™ Drum Mount System contains 1-Fogmaster Sewr-Jet™ drum mounted fogger with 15' nozzle on flex hose (25' available, too) with 1-OCP&E® Brand Peroxibase II, 55 gallon drum.  This portable oxidizing system is designed for temporary jobs.  This unit is equipped with a chemical metering pump adapter kit to control fog volume by attaching the chemical metering pump tubing to the fog head via the kit.  OCP&E® recommends a Stenner peristaltic metering pump model 45MHP2 (0.2 to 3 g.p.d.) or a model 45MHP10 (0.5 to 10 g.p.d.).  Cost for the pump is $279.00 additional.  To add pump, please make selection in the drop-down menu.

The Oxi-Fog™ system is ideal for lift station and wet well jobs, construction projects, wastewater treatment plant influent/headworks fogging, etc.  The chemical is fogged undiluted or diluted with water 1:1 (water:chemical) into confined spaced to control odor, hydrogen sulfide, and corrosion.  The Fogmaster Sewr-Jet is capable of a 40' fog output.  This portable oxidizing system is easy to set-up and perfect for emergencies, field studies, and short-term jobs.

OCP&E® Peroxibase II Description:

Peroxibase II contains 12% hydrogen peroxide with an ecologically sound surfactant, an industrial grade peroxide-stable deodorizer, and silicone defoamer.

Available in Mediterranean Citrus fragrance.  Fragrance Description: 

  • Top Notes: green apple, citrus, tangerine
  • Middle Notes: fresh herbaceous flora, rose, clove
  • Base Notes: woody, fir balsam, musk

Product Packaging: 55 gallon drum or 275 gallon tote

Fogmaster Sewr-Jet™ Description:

The remote discharge of the Sewr-Jet™ DM 4180 makes it ideal for odor control in hard-to-reach locations. Its tiny fog particles, with their vast surface area for efficient gas contact, provide high removal rates at low chemical cost. 

The anti-siphon design and corrosion resistant nozzle of the 4180 are particularly suited for such below-grade applications as sewer lift stations and holding tanks. The nozzle may be suspended from above, attached to a pit cover, or mounted through a side wall.

Available in three hose lengths, the 4180 can be controlled manually, or automatically with a repeat cycle timer or gas monitor.

Like all Fogmaster's drum mounted units, it's a breeze to set up. Just screw the power head into your chemical container (it fits the standard bung openings of 30 and 55 gallon drums), adjust the valve for desired particle size (anything from a dry fog to a wet mist) and aim the output.

The 4180 is well suited for maintenance and repair operations -- portable, reliable and easy to care for. Just hose off the nozzle between jobs, clean the intake filter as needed, and change motor brushes when they wear out (600 hour estimated lifetime).

Sewr-Jet™ DM 4180 ... another effective solution from Fogmaster.

Fogmaster Sewr-Jet DM Product Literature

Motor

1 Hp, 50/60Hz
418010: 120V, 7 amp  
418020: 220-240V, 3.5 amp
MS™ motor saver brushes standard

Motor BrushesMotor brushes are a wear part and must be replaced when worn (estimated life - 600 operating hours). Product includes standard MotorSaver™ brushes to protect commutator as brushes reach end of life.
BlowerBalanced fan, 2 stage, 20,000 rpm (no load)
Fogging NozzleHigh shear, counter rotating vortex 
Non-clogging design (no tiny orifices)
Hose15' & 25' lengths available (specify)
Particle Size7-30 micron VMD, adjustable
Liquid Flow Rate9 turn vernier valve with memory lock
0-9 oz/min [0-270 ml/min]
ChemicalsHandles both oil- and water-based chemical solutions 
(Liquid viscosity and density affect particle size distribution)
Liquid Reservoir Capacity
Attaches to standard bung opening of most 15-, 30- or 55-gallon chemical drums (drum not included)
Materials of 
Construction
Power head housing and drum adapter - aluminum
Tubing - fuel and oil resistant vinyl 
Fittings - brass 
Control valve - glass filled nylon, stainless stem, Viton® seal 
Hose - vinyl 
Nozzle assembly - Celcon w/ vinyl housing 
Hose clamps and mounting hardware - stainless
Regulatory ComplianceUL, CSA, CE, PSE
DimensionsH x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]
Shipping WeightPower head - 12 pounds 
Hose/nozzle assembly - 7 or 10 pounds
WarrantyOne year