Fogmaster Sentinel® 5855 1/2HP, 1 HDPE Nozzle Fogging System
The Sentinel 5855 systems uses one or more Sentinel nozzles attached to a low pressure air manifold to atomize a liquid into small droplets. Nozzles can be pipe-mounted or hose-mounted.
The controller, with several control options, regulates fogging activity, are available. These include a one-shot countdown timer, programmable 7-day timer and repeating cycle timer; humidity sensor/controller; or customer-supplied external device - anything that can close a switch (manual, contact, PLC, process controller, etc.).
The Sentinel nozzle creates a highly turbulent zone, dices liquid into droplets, and ejects it as a fast moving fog plume. Droplet size is adjustable, from less than 5 microns VMD to more than 40 microns.
This method ["cold fogging"] does not require high pressures, small orifices or hot surfaces for atomizing liquid. It works with both water- and oil-based liquids, and can atomize light suspensions (finely divided solids dispersed in a liquid carrier). And since the Sentinel nozzle has no small orifices, plugging is not a problem.
Nozzles are available in several materials. The standard nozzle uses Celcon® acetyl copolymer for internal elements; for fogging strong oxidizers, such as hydrogen peroxide and glutaraldehyde, HPDE elements are preferred; and for work in high temperature environments or involving erosive materials, nozzles are available in 316 stainless steel.
For technical details and performance data, see FTN-022.
Fogmaster Sentinel 5855 Product Literature
Applications of the Sentinel 5855 system include:
- Odor control at composting facilities, sludge drying sheds, septage receiving areas, lift stations, wastewater treatment plants, exhaust stacks, and so forth;
- Fogging of chemical sanitizers or disinfectants in clean rooms, agricultural production facilities, and, with a hose-mounted nozzle, treatments to ambulances, school busses, vans, shipping containers;
- Pest control (production agriculture, food products storage, warehouses);
- Production processes needing to atomize liquids or suspensions;
- Other atomizing applications with heavy duty-cycles and/or repeat cycle frequency.
Cart Mounting / Portable Applications For applications requiring portability, the 5855 can be mounted on a 2-wheeled cart. This carries controller, pump, blower (max size: 1.5 Hp), and one or two nozzles (pipe or hose mounted).
Liquid Supply The Sentinel 5855 can use a pump to supply fogging liquid from a pail, drum or tote. It can also draw from a solenoid valve to an elevated tank or water line. The carrier liquid can be premixed to the final dilution, or mixed in-line by a 5250 proportional injector.
The control module includes relay contacts to open the valve or activate a supply pump. Although any type of pump can be used, peristaltic pumps are often preferred. They are self-priming, available in the low GPM ratings used in fogging, and often have variable output drives.
A white paper, Liquid Supply Considerations for Sentinel® 5855 atomizing systems, provides useful background information on selecting equipment and designing the supply piping.
|Motor||Brushless, capacitor-start. Explosion proof motors optional.|
|Blower||External regenerative blower, 1/2 Hp and up. Blower size is determined by the number of nozzles supported (per zone). Typically cast aluminum housing. Motor drive: usually shaft-mounted; V-belt drive available. |
|Nozzles||One or more nozzles. Nozzles are available for mounting directly to the air supply pipe, or on a 15 ft hose with cam-lock fitting to attach to air source. Pipe-mounted nozzles offered with PVC union connection, or 1-1/2" NPTF. Fog discharge angle and direction is adjustable. |
Counter-rotating vortex design. High turbulence in nozzle shears feed liquid into fog-sized droplets (5-50+ micron VMD). Liquid viscosity, surface tension, density and liquid feed rate affect droplet size.
Nozzle is immune from plugging (minimum orifice approximately 1/8") and can be used to atomize liquids with suspended solids or light slurries.
|4-50+ µ, adjustable. |
|Liquid Supply||Liquid supply options include pump, gravity feed (elevated tank), or the local water system (in-line dilution with proportional injector). Liquid flow rate (per nozzle) is typically 0-20 oz [600 ml] /min, but flows up to 50 oz/min are used in some applications.|
|Liquid Flow Control||Liquid flow to each nozzle is controlled individually. This ensures proper distribution of liqud and control of droplet size at each point. A flowmeter (rotameter) with integral needle valve is normally used, but variable speed pumps are also available. |
|Fogging Liquids||Water. Water-based chemicals. Oil-based chemicals. Suspensions. Light slurries. |
|Portability||Cart option available for smaller systems [0.5 to 1.5 Hp]. |
1Ø, 120V, 20A circuit for blowers to 1.5 Hp
[Note: 15A circuit acceptable for blower to 1.0 Hp]
1Ø, 220-240V, 15A circuit for blowers to 2.5 Hp
3Ø, 220-240/440-460 for blowers > 2.5 Hp
|Intake Filter||Serviceable air cleaner, cartridge element. Filter flow rating determined by blower capacity. |
|Materials of |
|Enclosure - NEMA 4 (weathertight, corrosion resistant) fiberglass w/ stainless hardware |
Nozzle housing - corrosion resistant PVC w/ stainless clamps, or stainless steel
Liquid Tubing - fuel and oil resistant vinyl, Viton, nylon, or stainless steel
Fittings - brass, acetal, or stainless steel
Nozzle elements - Celcon, Stainless steel, or HDPE
|Dimensions||Depends on specific configuration|
|Shipping Weight||Depends on specific configuration|
|Warranty||One year limited warranty.|