The remote discharge of the Sewr-Jet™ DM 4180 makes it ideal for odor control in hard-to-reach locations. Its tiny fog particles, with their vast surface area for efficient gas contact, provide high removal rates at low chemical cost.
The anti-siphon design and corrosion resistant nozzle of the 4180 are particularly suited for such below-grade applications as sewer lift stations and holding tanks. The nozzle may be suspended from above, attached to a pit cover, or mounted through a side wall.
Available in three hose lengths, the 4180 can be controlled manually, or automatically with a repeat cycle timer or gas monitor.
Like all Fogmaster's drum mounted units, it's a breeze to set up. Just screw the power head into your chemical container (it fits the standard bung openings of 30 and 55 gallon drums), adjust the valve for desired particle size (anything from a dry fog to a wet mist) and aim the output.
The 4180 is well suited for maintenance and repair operations -- portable, reliable and easy to care for. Just hose off the nozzle between jobs, clean the intake filter as needed, and change motor brushes when they wear out (600 hour estimated lifetime).
Sewr-Jet™ DM 4180 ... another effective solution from Fogmaster.
Fogmaster Sewr-Jet DM Product Literature
Motor | 1 Hp, 50/60Hz |
Motor Brushes | Motor brushes are a wear part and must be replaced when worn (estimated life - 600 operating hours). Product includes standard MotorSaver™ brushes to protect commutator as brushes reach end of life. |
Blower | Balanced fan, 2 stage, 20,000 rpm (no load) |
Fogging Nozzle | High shear, counter rotating vortex Non-clogging design (no tiny orifices) |
Hose | 15' & 25' lengths available (specify) |
Particle Size | 7-30 micron VMD, adjustable |
Liquid Flow Rate | 9 turn vernier valve with memory lock 0-9 oz/min [0-270 ml/min] |
Chemicals | Handles both oil- and water-based chemical solutions (Liquid viscosity and density affect particle size distribution) |
Liquid Reservoir Capacity |
Attaches to standard bung opening of most 15-, 30- or 55-gallon chemical drums (drum not included) |
Materials of Construction |
Power head housing and drum adapter - aluminum Tubing - fuel and oil resistant vinyl Fittings - brass Control valve - glass filled nylon, stainless stem, Viton® seal Hose - vinyl Nozzle assembly - Celcon w/ vinyl housing Hose clamps and mounting hardware - stainless |
Regulatory Compliance | UL, CSA, CE, PSE |
Dimensions | H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm] |
Shipping Weight | Power head - 12 pounds Hose/nozzle assembly - 7 or 10 pounds |
Warranty | One year |